Microscope Lamp Trinocular Fluorescence Microscopy Notes for Microscope Lens

Product Description

•  

BK6000-FL4T Fluorescence Microscope

         Fluorescent Microscope, Trinocular, B/G/V/UV

• --Upgradeable to Objectives With 100x Water Objective
• --100W Mercury Fluorescent Light Source For Observe In Pathology, Clinical Lab Use
• --Large Head Eyepiece SWF10x/22mm Eyepiece
• --Large Mechanical Stag 182x140mm/77x52m With Double Slide Holder
• --High Brightness 12V30W Halogen Koehler Illumination

• Product Model: 

• BK5000-FL series		1	BK6000-FL Single
  		2	BK6000-FL Double
  		3	BK6000-FL2
  		4	BK6000-FL2T
  		5	BK6000-FL4
  		6	BK6000-FL4T
  		7	BK6000-FL2LED
  		8	BK6000-FL2LEDT
  		9	BK6000-FL4LED
  		10	BK6000-FL4TLEDT

   
   

•  
•  

 

Specification
Items	BK6000-FL Fluorescent Microscope	FL2	TR	FL4	TR
Head	Seidentopf Binocular Head Inclined 30°,Rotatable 360°, Interpupilary Distance 48-75mm	·	○	·	○
	Seidentopf Trinocular  Head Inclined 30°,Rotatable 360°, Interpupilary Distance 48-75mm, Light Split P80:E20/Switch E100:P0/E0:P100	○	·	○	·
Eyepiece	WF10X/22mm (High Eyepoint)	··	··	··	··
Nosepiece	Quintuple, Backward	·	·	·	·
Infinity Plan Objective	PLAN 2.5X/0.07,W.D.=8.47mm	○	○	○	○
	PLAN 4X/0.10,W.D.=12.10mm	·	·	·	·
	PLAN 10X/0.25,,W.D.=4.64mm	·	·	·	·
	PLAN 20X/0.40(S),W.D.=2.41mm	·	·	·	·
	PLAN 40X/0.66(S),W.D.=0.65mm	·	·	·	·
	PLAN 60X/0.80(S),W.D.=0.33mm	○	○	○	○
	PLAN 100X/1.25(S,Oil),W.D.=0.12mm	·	·	·	·
	PLAN 100X/1.15(S,Water),W.D.=0.19mm	○	○	○	○
Working Stage	Mechanical Stage Size 175 mm×145mm, Travel 76mmX52mm, Scale: 0.1mm, Double Slide Holder	○	○	○	○
	Rackless (Integrated) Mechanical Stage, Size 182×140mm, Travel Range 77×52mm, Double Slide Holder	·	·	·	·
Focusing	Coaxial Coarse & Fine Focusing, Coarse Focusing Travel Range: 22mm, Fine Focusing Div. 0.002mm	·	·	·	·
Condenser	Abbe Condenser N.A.1.25, Iris Diaphragm, Rack & Pinion Up/Down	○	○	○	○
	Swing-out Condenser,N.A.0.9/0.13,Iris Diaphragm	·	·	·	·
Illumination	Transmit Light 5W LED Koehler Illumination, Wide Voltage 100V~240V, Field Diaphragm	·	·	·	·
	Transmit Light 12V20W Halogen Koehler Illumination, Wide Voltage 100V~240V, Field Diaphragm	○	○	○	○
	Transmit Light 12V30W Halogen Koehler Illumination, Wide Voltage 100V~240V, Field Diaphragm	○	○	○	○
Field Diaphragm	For Kohler Illumnation	·	·	·	·
Filter	Dia.45mm, Blue	○	○	○	○
	Dia.45mm, Green	○	○	○	○
	Dia.45mm, Yellow	○	○	○	○
Dark Field	Dark Field Condenser, Dry, N.A.0.83-0.91, For 4x10x40x Objective	○	○	○	○
	Dark Field Condenser, Immersion, N.A.1.3, For 100x Objective
Polarizing	Analyzer + Polarizer Set	○	○	○	○
Phase Contrast	Infinity Plan Phase Contrast Objective 10x + Phase Contrast Slide 10x + Phase Contrast Condenser + Telescope 11x + Green Filter	○	○	○	○
	Infinity Plan Phase Contrast Objective 20x + Phase Contrast Slide 20x + Phase Contrast Condenser + Telescope 11x + Green Filter	○	○	○	○
	Infinity Plan Phase Contrast Objective 40x + Phase Contrast Slide 40x + Phase Contrast Condenser + Telescope 11x + Green Filter	○	○	○	○
	Infinity Plan Phase Contrast Objective 100x + Phase Contrast Slide 100x + Phase Contrast Condenser + Telescope 11x + Green Filter	○	○	○	○
	Turret Phase Contrast Attachment Infinity Plan Phase Contrast Objective 10x20x40x100x, Turret Phase Contrast Condenser 5-Holes, Telescope 11x, Green Filter	○	○	○	○
Fluorescence	Upgrade From BK6000-B/T Biogical  Microscope With B,G China Fluorescent Set 100W Mercury Lamp House 100W Mercury Power Box, Digital Disp. 6 Holes Disc Fluorescent Unit Ultraviolet Protection Barrier Centering Objective China 100W Mercury Lamp 2 pcs	·	·
	Upgrade From BK6000-B/T Biogical  Microscope With B,G,U,UV China Fluorescent Set 100W Mercury Lamp House 100W Mercury Power Box, Digital Disp. 6 Holes Disc Fluorescent Unit Ultraviolet Protection Barrier Centering Objective China 100W Mercury Lamp 2 pcs			·	·
Adapter	C-Mount 0.5x, Focus Adjustable	○	○	○	○
	C-Mount 0.75x, Focus Adjustable	○	○	○	○
	C-Mount 1.0x, Focus Adjustable	○	○	○	○
	Digital Eyepiece Camera Adapter, Dia. 23.2mm/25mm	○	○	○	○
Package	Carton Size 520×470×490mm, 1 Unit/Ctn
Weight	Gross Weight: 17 kgs, Net Weight: 15 kgs
Note: "."In Table Is Standard outfits, "○" Is Optional Accessories

1). Take all parts from the package,remove the protective package and place it on the vacant bench.
2). According to the installation instruction to install microscope main body.
3). Use lamp power line to connect lamp power socket and relevant socket.
4). Joint the observing tube with bayonet, and then lock it with wrench.
5). Slightly loosen the locking screw ,then connect the tube connector on the front and the back-tube of the       
     fluorescence mercury power box, fixed with locking screw.
6). Then put the device in upright direction, then link the main body connector with main body bayonet, fasten the         microscope with screw.
7). Turn fluorescence device and put the protective plate in with the screw, then tighten it by wrench.

 

                                                        Maintenance

--- If the lens surface has dust, please clear with a blow ball. If the lens surface with fingerprints or oil stain, please clean gently     
    with absorbent cotton or lens paper dipped in a little ethanol ether mixture (ratio 1:4) .
    Absolute alcohol is an inflammable material, please turn off the power and don't close to open fire , Please assure indoor   
    ventilation. 
---Don't use solvent to wipe non-glass parts unless with soft hairless cotton in little neutral cleanser. 
---Don't disassemble microscope parts, otherwise result in damage for performance.

                                                         After Service

---Product Warranty is 3 year since delivery date, the used life is ten years. 
---During the period, if any quality deffect part (non-human damage), we will bear shipping cost and send new part as 
    replacement to you. 
---Any part caused by human damage, we will only charge for material cost, and buyers need to pay shipping cost.  
---Exceed the warranty period, we will also only charge for material cost, and buyers need to pay shipping cost.  
---If there is any problem or question of using our product, we will offer technical support by email or facetime by phone etc. This 
   service is lifelong. 

                                                      Favorable Reception

FAQ
Q1: How do I know which model is suitable for my product application?
You just need to tell us the following information then we can offer you a suitable solution? In addition, you can also send us the specimen and we will arrange professional engineers for proofing evaluation.
1) What is your product? required detailed specifiction?
2) What is the current production process?
3) What is your desired budget and delivery time.

Q2: When I get this microscope, but I don't know how to use it. What should I do?
We will send teaching video of both installation and operation, as well as the English manual. If you have further questions, we have engineers who can speak English can serve you on-line directly. And for some countries , like in India, Malaysia, Korea,Spain, we have local support team, more countries will be in the picture soon. 

Q3: How can I do if the Microscope goes wrong?
We guarantee product quality for 36 months, during this period, if spare parts of the machine were not man-made damaged, we can send the component to the customer in best delivery. Besides guarantee period, we still provide you free online services for life.If parts broken, you can order replacement parts from us.

Q4. Can you customized product according to different application?
Yes, we are very dedicated to combine with our current ability with the main leading supplier to offer you the customized application.

Q5. What is your normal lead time?
Generally standard machine, our lead time is 2-7 days after PO confirmed. Customized product need a little longer.

Q6. Will the package damaged during transportation?
Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe tranportation. We have exported to 80 countries worldwide. So please don't worry, you will receive the parcel in good condition

Q7:Why should I choose here compared with other companys?
We are factory with 453 employees, turnover reached 100 millions USD in 2019, ISO 9001/13854 certificated and most products are CE/SGS/Rohs approoved, can offer you a high-quality pre-sale, in-sale and after-sales solution.