BK5000-FL2T Fluorescence Microscope
Fluorescent Microscope, Trinocular, B/G
- --Upgradeable to Objectives With 100x Water Objective
- --100W Mercury Fluorescent Light Source For Observe In Pathology, Clinical Lab Use
- --Large Head Eyepiece SWF10x/20mm Eyepiece
- --Large Mechanical Stag 175x145mm/77x52m With Double Slide Holder
- --High Brightness 6V30W Halogen Koehler Illumination
-
-
- Product Model:
-
| BK5000-FL series |
1 |
BK5000-FL Single |
| 2 |
BK5000-FL Double |
| 3 |
BK5000-FL2 |
| 4 |
BK5000-FL2T |
| 5 |
BK5000-FL4 |
| 6 |
BK5000-FL4T |
| 7 |
BK5000-FL2LED |
| 8 |
BK5000-FL2LEDT |
| 9 |
BK5000-FL4LED |
| 10 |
BK5000-FL4TLEDT |
-
1). Take all parts from the package,remove the protective package and place it on the vacant bench.
2). According to the installation instruction to install microscope main body.
3). Use lamp power line to connect lamp power socket and relevant socket.
4). Joint the observing tube with bayonet, and then lock it with wrench.
5). Slightly loosen the locking screw ,then connect the tube connector on the front and the back-tube of the
fluorescence mercury power box, fixed with locking screw.
6). Then put the device in upright direction, then link the main body connector with main body bayonet, fasten the microscope with screw.
7). Turn fluorescence device and put the protective plate in with the screw, then tighten it by wrench.
Maintenance
--- If the lens surface has dust, please clear with a blow ball. If the lens surface with fingerprints or oil stain, please clean gently
with absorbent cotton or lens paper dipped in a little ethanol ether mixture (ratio 1:4) .
Absolute alcohol is an inflammable material, please turn off the power and don't close to open fire , Please assure indoor
ventilation.
---Don't use solvent to wipe non-glass parts unless with soft hairless cotton in little neutral cleanser.
---Don't disassemble microscope parts, otherwise result in damage for performance.
After Service
---Product Warranty is 3 year since delivery date, the used life is ten years.
---During the period, if any quality deffect part (non-human damage), we will bear shipping cost and send new part as
replacement to you.
---Any part caused by human damage, we will only charge for material cost, and buyers need to pay shipping cost.
---Exceed the warranty period, we will also only charge for material cost, and buyers need to pay shipping cost.
---If there is any problem or question of using our product, we will offer technical support by email or facetime by phone etc. This
service is lifelong.
Favorable Reception
FAQ
Q1: How do I know which model is suitable for my product application?
You just need to tell us the following information then we can offer you a suitable solution? In addition, you can also send us the specimen and we will arrange professional engineers for proofing evaluation.
1) What is your product? required detailed specifiction?
2) What is the current production process?
3) What is your desired budget and delivery time.
Q2: When I get this microscope, but I don't know how to use it. What should I do?
We will send teaching video of both installation and operation, as well as the English manual. If you have further questions, we have engineers who can speak English can serve you on-line directly. And for some countries , like in India, Malaysia, Korea,Spain, we have local support team, more countries will be in the picture soon.
Q3: How can I do if the Microscope goes wrong?
We guarantee product quality for 36 months, during this period, if spare parts of the machine were not man-made damaged, we can send the component to the customer in best delivery. Besides guarantee period, we still provide you free online services for life.If parts broken, you can order replacement parts from us.
Q4. Can you customized product according to different application?
Yes, CNOPTEC is very dedicated to combine with our current ability with the main leading supplier to offer you the customized application.
Q5. What is your normal lead time?
Generally standard machine, our lead time is 2-7 days after PO confirmed. Customized product need a little longer.
Q6. Will the package damaged during transportation?
Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe tranportation. We have exported to 80 countries worldwide. So please don't worry, you will receive the parcel in good condition
Q7:Why should I choose CNOPTEC compared with other companys?
We are factory with 453 employees, turnover reached 100 millions USD in 2019, ISO 9001/13854 certificated and most products are CE/SGS/Rohs approoved, can offer you a high-quality pre-sale, in-sale and after-sales solution.
){kind=link}